【Feed Size】: 25-35mm
【Improvement】: All important parts of raymond mill are made of high quality steel, and all wear-resistant parts are made of high-performance wearresistant materials. The whole machine has high wear resistance and reliable operation.
Force produced from milling roller connected by pull rod and high pressure spring can avoid damages caused by bulk materials to the equipment.
Resilient coupling between main engine and the separator can reduce vibration and noise and improve service life of the equipment. Because of connecting crushing, drying, grinding, classifying and transmission together with simple system and compact layout, it covers about 50% of the area of the ball mill system and can be outdoor arrangement, which can reduce the investment cost a lot.
Milling roller devices adopt superimposed multistage seal with excellent seal performance. Unique air circulation system with advanced dust remover carries the environmental protection concept through to the end.
Impeller devices with high density and high precision increase more than 50% of finished product yield under the same power. Efficient and energy-saving centrifugal induced draft fans improve the efficiency of induced draft fans greatly. Convenient impeller adjusting devices improve the precision of the finished product.
【Technical Parameters】
| Model | Max. Feed Size (mm) | Finished Product Size (mm) | Production Capacity (t/d) | Rotating Speed of Main Motor (r/min) | Main Motor Power (kw) | Milling Ring Diameter (mm) | Milling Ring Height (mm) | Milling Roller Diameter (mm) | Milling Roller Height (mm) | Milling Roller Qty. | Overall Dimension(m) (Length × Width × Height) |
| MTM75 | <15 | 0.613-0.033 | 1-3 | 160 | 18.5 | Inner Diameter 780 | 150 | 260 | 150 | 3 | 4.3×3.5×5.1 |
| MTM85 | <20 | 0.613-0.033 | 1.2-4.6 | 150 | 22 | Inner Diameter 830 | 140 | 270 | 140 | 3 | 5.3×4.1×5.2 |
| MTM100 | <25 | 0.613-0.033 | 2.1-5.6 | 130 | 37 | Inner Diameter 950 | 170 | 310 | 170 | 4 | 7.1×5.9×7.9 |
| MTM130 | <30 | 0.613-0.033 | 3-9.5 | 103 | 75 | Inner Diameter 1280 | 210 | 410 | 210 | 5 | 7.85×8×9.7 |
| MTM160 | <35 | 1.6-0.045 | 5-22 | 82 | 132 | Inner Diameter 1600 | 270 | 440 | 270 | 6 | 12.55×5.7×8.3 |